SMAKSol Protect
SMAKSol Protect is important part of your Solar Power System and
protects people, Solar Power System and Buildings.
SMAK Protect has additional function - it also junction box.
For Photovoltaic
Systems placed on buildings
Without External Lightning
Protection
 |
For Photovoltaic Systems placed on buildings
With External Lightning
Protection
|
|
Two main types 1 to 1 and 4 to 1:
- SMAKSol Protect CII/C 1DC1DC MC:
- SMAKSol Protect CII/C 4DC1DC MC:
|
Two main types 1 to 1 and 4 to 1:
- SMAKSol Protect CI/B+C 1DC1DC MC:
- SMAKSol Protect CI/B+C 4DC1DC MC :
|
|
For Photovoltaic Systems placed on buildings Without External Lightning Protection
|
For Photovoltaic Systems placed on buildings With External Lightning Protection
|
|
Only version 1 to 1:
- SMAKSol Protect CII/C 1DC1DC MC + SW:
|
Only version 1 to 1:
- SMAKSol Protect CI/B+C 1DC1DC MC + SW:
|
How to Connect SMAKSol Protect into a Photovoltaic System
Connection of SMAKSol Protect with Photovoltaic Park/Area/String/Module Outside of a Building
Connection of SMAKSol Protect with Photovoltaic Park/Area/String/Module inside of a Building
|
CLASS II,C - V PROTEC C(R) 40
Features :
- For Photovoltaic Systems
- In = 20kA / pole
- Imax = 40kA / pole
- MOV
- Compact Housing
Product Summary :The PV PROTEC C(R) 40 series of over voltage surge protective devices has been developed to protect against indirect lightning discharges and is intended to protect photovoltaic systems.The circuit topology consists of two (three)varistor stages each protected by a thermal disconnection device.
Category IEC / EN / VDE: Class II / Type 2 / C
Location of use: Branch sub-distribution boards
Protection modes: (+) - PE, (-) – PE
Protective element: High energy MOVs
Surge discharge ratings: In = 20kA, Imax = 40kA
Internal protection and safety: Thermal disconnector
Status indication: Mechanical flag + remote contacts (R)
|
CLASS I, B+C - PV PROTEC BS(R) 12.5
Features :
- For Photovoltaic Systems
- Iimp = 12.5kA / pole
- Imax = 40kA / pole
- High Energy MOV
- Compact Housing
Product Summary :The PV PROTEC BS(R) 12.5 series of over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to protect photovoltaic systems. The circuit topology consists of two varistor stages each protected by a thermal disconnection device.
Category IEC / EN / VDE: Class I / Type 1 / B+C
Location of use: Photovoltaic systems - PV module side
Protection modes: (+) - PE, (-) - PE
Protective element: High Energy MOVs
High surge discharge ratings: Iimp = 12.5kA, Imax = 40kA
Internal protection and safety: Separate thermal disconnector for each MOV block
Status indication: Mechanical flag + remote contacts (R)
|
